• Metalworking machinery

Boring and Drilling machinesRSS

Used boring and drilling machines at MachTechnica.com- dealer of used machines!

Dear customers, here you can discover, or we can find for you- used boring machines, or drilling machines of brands, made by well-known in the world machine producers as:  table type horizontal boring mill, jig boring machines, deep drilling machine, boring drilling, radial drilling machines, horizontal drilling machines, jigbore, bore mill, floor type horizontal boring machine, brands like TOS Varnsdorf, SKODA borers, SCHIESS, SCHARMANN, STANKO, used Doosan horizontal boring mill, SIP- HAUSER, SIP machine, MORANDO, JUARISTI, CSEPEL, BTA drilling machine, ATsedge, used Lucas boring mills, TBT deep hole drilling machines, MIKROMAT, UNION, Serdi machines, MAS Kovosit, FEHLMANN, PAMA machine tools, used Kuraki boring mill,  etc.

Used boring mill, or drilling machine, is preferred decision over new one since the same have no huge esteem lost when reselling it. This implies you won't lose too much cash. New ones devalue a great deal after the initial two years, which compelling you to resale at low cost.

Used machines- accessible at rather lower cost than the new ones. This does not suggest that a horizontal borer machine is in bad state or out of operation, it implies the machine has been at first utilized by a different user.

Used boring machines offer greater adaptability when your intention is to use a machine for a shorter period, or to begin another trial production. You will get them at a cheaper price and resale them at nearly a similar value you have got them.

If you need a bore machine or drilling machine, however your financial plan can just land you a second hand one, at that point this isn't a major ordeal. Having less money you are still ensured to get amazing machines, produced from quality materials, which are as good as the new ones. This is just conceivable at machtechnica.com

The machines are in great working conditions with the best corresponding costs. So if you are searching for a superior machine, at that point there is a wide determination for you to browse.

Customer satisfaction is our key objective since we need you to return for increasingly and and bring a friend, wishing to buy. So in the event that you need a utilized: horizontal bore machine, drilling machine, and just with a single click, then machtechnica.com has a wide selection for you.

Used boring machines for sale- at machtechnica.com.

If you would like more information about our machines, you can call or email us!

2E440A STANKO jig boring machine

2E440A STANKO jig boring machineTable dimensions 710x400mmTraverse in axles X/Y/Z -630x400x410mmDrilling diameter max 25mmDiameter of boring max 250mmRetractable quill 100mmTable f ...

Accessories for Jig Boring Machine DIXI F 330 Y

Jig Boring Machine DIXI F 330 YFull set of accessories.Detailed pictures upon request

Accessories for Jig boring machine HAUSER MP-54

Accessories for Jig boring machine HAUSER MP-54Full set of accessories.Detailed pictures upon request.

Deep hole drilling and boring machine BURGSMUELLER RTM 300x3200

Deep hole drilling and boring machine BURGSMUELLER RTM 300x3200YOM 1981. Used very short time. Perfect condition.The machine has the following functions:1. Drilling and Boring up t ...

Deep Hole Drilling Machine MORANDO FCN 3x1000

Heavy duty Deep Hole Drilling Machine MORANDO, type FCN 3x1000YOM 1976Coring diameter - max. 31.75 mmDrilling depth 1000 mmx-travel 6000 mmy-travel 2500 mmNumber of spindles 3 piec ...

DIXI 350 CNC Jig Boring Machine

Jig Boring Machine DIXI 350 CNCMach. No. 350-16Control: Dixi CNC 4400Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating tableC-axis verti ...

FEHLMANN PICOMAX 100 CNC drilling and milling machine

Precision CNC drilling and milling machine FEHLMANN PICOMAX 100YOM 1987CNC- HEIDENHAIN TNC 155Spindle nose: SF 32 spindle speed: 50 - 7 100 rpm 6 spindle feeds: 0.03 - 0.4 mm/r spi ...

FEHLMANN PICOMAX 100- CNC 2 drilling machine

FEHLMANN PICOMAX 100- CNC 2 CNC HEIDENHAIN TNC 151 Controlled axis : 2.5 -X,Y Heidenhain incremental lines -Z Heidenhain encoder Spindle nose: SF 32 spindle speed: 50 - 7 100 ...

FEHLMANN PICOMAX 100- CNC 3 drilling and milling machine

Precision CNC drilling and milling machine FEHLMANN PICOMAX 100- CNC 3YOM 1989, Mach. No. 16189160CNC HEIDENHAIN TNC 151Spindle nose: SF 32 spindle speed: 50 - 7 100 rpm 6 spindle ...

ModelPICOMAX 100- CNC 3
Gang drilling machine PK 031

Gang drilling machine on the base of PK 031Maximum drilling diameter in steel mm 32Maximum drilling diameter in cast iron mm 40Size of table mm 1500x500Working table surface mm 130 ...

Horizontal Borer SKODA W200G

Horizontal Borer SKODA W200GFloor typeYOM 1986, Mach. No. Digital readout Philips- X,Y,ZSpindle 200 mmMain spindle ball metrical: 120mmColumn travel X 8000 mm Headstock vertical tr ...

ModelW200G
Horizontal borer STANKO 2N636GF1

Horizontal boring mill STANKO 2N636GF1YOM 1988Spindle 125 mmTable 1600 x 1800 mmMax. horizontal (axial) movement of the spindle (Z') - 1000 mmMax. vertical movement of the headstoc ...

Horizontal Borer UNION BFT 90/3-1

Horizontal Borer UNION BFT 90/3-1 Spindle diameter 90 mmTool taper: ISO 50 DIN 2048Spindle speeds range 8-1600 rpmTable dimensions 1000×1120 mmTable rotation 360 °Maximum table loa ...

Horizontal Boring Machine DIXI F 310

Horizontal Boring Machine DIXI F 310Serial No. 1446Standard & HEIDENHAIN ControlSpindle diameter 120 mmSpindle ISO50Spindle speeds 8 - 800 RpmX/Y/Z-axis travel 920/730/995 mmTa ...

ModelF 310
Horizontal Boring machine SKODA W200G

Horizontal Boring machine SKODA W200GFloor typeYOM 1979, Mach. No. Ob21832. Almost unused.Spindle 200 mmMain spindle ball metrical: 120mmColumn travel X 6000 mm Headstock vertical ...

Horizontal boring machine SKODA W200H

Horizontal boring machine SKODA W200HYear of manufacture 1981Spindle diameter, mm 200Spindle cone, metric 120Max. spindle axis torque, Nm 34300Frame height, mm 550Slides width, mm ...

Horizontal Boring machine SKODA WD 200A

Horizontal borer floor type SKODA WD 200AAvailable 2 machines: Mach. No. Ob20221 and No. Ob20228. YOM 1970 Spindle diameter 200 mmSpindle Speeds 1.5 to 630 RPMTravels: X/Y/Z/W: 200 ...

Horizontal Boring machine STANKO 2A614

Horizontal Boring machine STANKO 2A614DRO- Digital readout X/Y/ZSpindle dia 80 mm11 kWSpindle 20-1600 rpmFace plate 6.3- 200 rpmTable 1000x800 mmTable 360 degreesFace plate 500 mmS ...

Horizontal Boring machine STANKO 2A622-2

Horizontal Boring machine STANKO 2A622-2Table typeYOM 1990. Mach. No. 421. Almost unused, just 2 months in operation.Spindle Size: 110 mm, X/Y/Z/W- 1250x1000x1000x710 mmRotary tabl ...

Model2A622-2
Horizontal Boring machine STANKO 2A635

Horizontal Boring machine STANKO 2A635Table typeYOM 1985.Very good working condition.Spindle diameter 125 mmTable size 1600 x 1250 mmStrokes 1600 x 1400 mm, Vertical 1400 mmWorkpie ...

Horizontal Boring machine STANKO 2B660

Horizontal Boring machine STANKO 2B660Floor typeMach. No.37X travel 6000mm Y travel 3000mm Max. processing internal diameter 1800 mmMax. longitudinal travel of ram-type spindle 160 ...

Model2B660
Horizontal Boring Machine STANKO 2H636GF1

Horizontal Boring Machine STANKO 2H636GF1Spindle diameter: 125 mmFace plate diameter: 800 mmTable dimensions: 1600 x 1800 mmMax workpiece weight: 8000 kgMax table travel: long: X-1 ...

Model2H636GF1
Horizontal Boring machine STANKO Sverdlov 2620B

Horizontal Boring machine STANKO Sverdlov 2620B -Table size: 1250 x 1120 mm -Spindle diameter: 90 mm-12.5- 1600 rpm-7.5/10 kW

Horizontal Boring machine TOS Varnsdorf H100A

Horizontal Boring machine TOS Varnsdorf H100ATable typeYOM 1964.Spindle Diameter: 100 mm.Cross (X) Travel: 1300 mm.Vertical (Y) Travel: 1250 mm.Longitudinal (Z) Travel: 1250 mm.Tab ...

Horizontal Boring machine TOS W75

Horizontal Boring machine TOS W75Producer TOS VARNSDORFYOM: 1988, Mach. No. 05-30Spindle 75 mmSpindle speeds 18-1800 rpmSpindle taper ISO 40X/Y/Z axis: 1250/900/560 mm Table size 9 ...

ModelW75
Tags
Horizontal Boring machine UNION BFT 110/5

Horizontal Boring machine UNION BFT 110/5, WMWSpindle Diameter: 110 mmISO 50Max. boring dia. without face plate 630 mmMax. boring dia. with face plate 1250 mmFace plate dia. 700 mm ...

Horizontal Boring Mill UNION BFT 90/3

UNION BFT 90/3 Horizontal Boring MillSpindle diameter 90 mmTool taper: ISO 50 DIN 2048Spindle speeds range 8-1600 rpmTable dimensions 1000×1120 mmTable rotation 360 °Maximum table ...

Jig Borer MIKROMAT BKoE 400x630 with DRO MITUTOYO

Jig Boring machine MIKROMAT BKoE 400x630DRO system- MITUTOYOTable surface: 400x630mmMax load on table: 125kg Max strokesLongitudinal table stroke (x): 400mmCross table stroke (y): ...

Jig Boring Machine DIXI F 330 Y

Horizontal Jig Boring Machine DIXI F 330 Y Control CNC 2233 (4 axis X,Y,Z,B)YOM 1986, Serial No. 1448X/Y/Z- 920x870x780 mmMax. Boring Dia.: 400 mmRotary table size 900x1300 mm, Tab ...

Jig boring machine MIKROMAT 9A

Jig boring machine MIKROMAT 9A YOM 1985x-travel: 1120 mmy-travel: 710 mmz-travel: 315 mmw-axis: 630 mmspindle diameter: 125 mmsize of pallet: 1400 x 900 mmtable load: 2,5 tcontrol: ...

Jig boring machine MIKROMAT 9B

Jig boring machine MIKROMAT 9B (BKoZ 900x1400/6PS2)spindle diameter 125 mmx/y/z/w travel 1120x710x315x630 mmtable surface area 900 x 1400 mmtable load 2000 kpfeed range - boring 0, ...

Jig Boring machine MIKROMAT BKoZ 900 x 1400/1 NC2

Jig Boring machine MIKROMAT BKoZ 900 x 1400/1 NC2- X/Y/Z/W- 1120/710/315/630-distance between column 1080 mm-distance between table and head 900 mm-36- 2240 1/min-spindle dia 125 m ...

ModelBKoZ 900 x 1400/1 NC2
Jig boring machine SIP HYDROPTIC 6A

Jig boring machine SIP HYDROPTIC 6ATable1100x842 mm Travels X/Y/Z- 1000x700x800 Table load max. 1000 kg Drill capacity in steel 60 mm Taper in spindle: MT 4 Diameter of drilling sp ...

ModelHYDROPTIC 6A
Jig Boring Machine SIP- HAUSER MP-52 DR

Jig Boring Machine SIP- HAUSER MP-52 DR Serial No. 08042-axis digital display ELESTA- VISULESTA IISpindle diameter: 110 mmTable 1020 x860 mmLongitudinal travel (X-axis) 900 mmTrans ...

Jig boring machine SIP- HAUSER MP-54

Jig boring machine SIP- HAUSER MP-54 SIP-HAUSER, SwitzerlandYOM 1992, Mach.No. -1005 Table: 1020 x 860 mm X/Y/Z/W: 900 / 600 / 200 / 635 mm Distance between columns: 950 mmPosition ...

Jig Boring machine STANKO 2431SF10 - DRO HEIDENHAIN

Jig Boring machine STANKO 2431SF10DRO HEIDENHAINTable dimensions- working surface 560 x 320 mmTable load capacity 300 kgDistance spindle-table 50-575 mmX/Y - 400/250 mmAdjusting st ...

Jig boring machine STANKO 2E450A

Jig boring machine STANKO 2E450AYOM 1990. Condition- not used.Table effective area length 1120 mmTable effective area width 630 mm Main electric motor power 7.2 kW Spindle speed 10 ...

MIKROMAT 6A CNC Jig Boring machine

Jig Boring machine MIKROMAT 6ACNC control HEIDENHAINSpindle speed range 36 - 2240 rpmTable 1000 x 630 mmDistance between spindle nose and table 20-850 mmLongitudinal travel of the ...

MIKROMAT 9B Jig boring machine

Jig boring machine MIKROMAT 9B (BKoZ 900x1400/6PS2)spindle diameter 125 mmx/y/z/w travel 1120x710x315x630 mmtable surface area 900 x 1400 mmtable load 2000 kpfeed range - boring 0, ...

MIKROMAT BKoE 400x630 Jig Boring machine

MIKROMAT BKoE 400x630 Jig Boring machine Table surface: 400x630mmMax load on table: 125kg Max strokesLongitudinal table stroke (x): 400mmCross table stroke (y): 250mmVertical spind ...

MIKROMAT BKoZ 900 x 1400 Jig Boring machine

Jig Boring machine MIKROMAT BKoZ 900 x 1400-Mach. No. 16.31.17- X/Y/Z/W- 1120/710/315/630-distance between column 1080 mm-distance between table and head 900 mm-36- 2240 1/min-spin ...

ModelBKoZ 900 x 1400
POLAMCO H. CEGIELSKI GRV-553 Radial drilling machine

POLAMCO H. CEGIELSKI GRV-553 Radial drilling machineOrigin- HungaryDrilling capacity in steel 60 mmSpindle overhang 1600 mmThroat 1700 mmSpindle speed 14-1600 rpm.Spindle taper MT5 ...

ModelGRV-553
Radial drilling machine CSEPEL RFH 100/3000

Radial drilling machine CSEPEL RFH 100/3000Bore capacity in steel/ cast iron 100/120 mmArm length 3000 mm Workpiece weight 15 tonsSurface area 2495 x 1550 mm Spindle taper MT 6 Spi ...

Radial drilling machine MAS KOVOSIT VR10

Radial drilling machine MAS Kovosit VR10Arm length 3500 mmMaximum spindle face to bottom table 2750 MM Stroke of spindle 600 MM

Radial Drilling Machine MAS VR 6 A

Radial Drilling Machine MAS VR 6 AManufactured in Czech republicdrilling capacity steel/cast iron 63 mmbore capacity in cast iron 80 mm arm length 2000 mmspindle taper MK 5 workpie ...

Radial Drilling machine STANKO 2H55

Radial Drilling machine STANKO 2H55Drilling capacity: 50 mmDistance from an axis of a spindle up to a forming column, mm 450-1600Morze 5Spindle speed: 20-2000 rpmAvailable 10 machi ...

Rotary table SKODA Е20

Rotary table SKODA Е202000 х 2000 mmloading capacity 20 t.Weight 9.350 kg360 degreesAvailable 2 items

SCHARMANN Dekamat FB75 Table Type Borer

SCHARMANN Dekamat FB75 Table Type Borer Spindle diameter 130 mmSpindle taper ISO 50HEIDENHAIN X/Y/Z travel 1500/870/770Table 1200x1000 mmT-slots 7Table load 1500 kgSpindle speeds s ...

Advanced Search

Search by keyword

 
Add your surplus machines

Subscribe to our newsletter

Web Analytics