Hydraulic sheet-stamping press. Type P236B. Russia. Double action.
The press is used to carry out the operations of drawing, hot and cold forming when work pieces such as bottoms, tanks, boilers are manufactured.
It is double-action, vertical, four-arm, presses, with a pull-out table, a hydraulic cushion and a side pusher.
The oil hydraulic drive is individual.
Rated force exerted by the cross-piece, kN
1st stage 5000
2nd stage 10000
3rd stage 16000
Rated force of clamping cross-piece, kN
1st stage 5000
2nd stage 10000
Rated force of hydraulic cushion, kN 5000
Motion of the cross-piece (drawing and clamping), mm 1400
Maximum distance between the table and the drawing cross-piece, mm 2500
Dimensions of the table, mm 3550 x 3550
Speed of the cross-piece in double-action and single-action presses, mm/c
idle run 200
backstroke 125
working stroke for double action 24.4
working stroke for single action 14.6
Rated pressure, MPa 20
Total installed power of all electric motors, kW 438.75
Dimensions of the press, mm
length 18750
width 10560
height above the floor level 8500