Vertical Machining Centers, Type MCV-M10H ( MCV-M10)
MCV-M8H (MCV-M8)
MCV-M6H ( MCV-M6)
TRAVEL X,Y,Z,- 1100*600*560mm/ 800*500*500mm/ 600*400*400mm
Spindle nose to table surface; 90~650 mm / 110~610 mm/ 110~510 mm
Spindle center to column surface; 650 mm / 550 mm / 450 mm
X,Y,Z, linear ways span; 420/786/446mm; 370/600/456mm; 360/590/446mm
Table size; 1200* 550 mm / 900*460 mm/ 700*400 mm
T-slot (Width*No.*Pitch); 18mm*5*100mm; 14mm*3*140mm; 14mm*3*150mm
Table load; 800 kgs; 500 kgs; 300 kgs
Spindle taper; BT-40; BT-40; BT-40
Spindle drive; direct-coupled; Belt / direct-coupled; Belt / direct-coupled; Belt
Spindle speed; 15000 rpm; 10000rpm / 12000/15000 rpm ; 10000 rpm / 12000/15000 rpm; 10000rpm
Spindle motor; 7.5/11 KW; 5.5/7.5 KW; 5.5/7.5 KW
3 Axes servo motor
Rapid feed X,Y/Z- 36/36/24M ; 24/24/20M;
36/36/30M; 20/20/16M;
36/36/30M; 20/20/16M
Cutting feed; 1-12M; 1-6M;
1-12M; 1-6M;
1-12M; 1-6M
MAGAZINE-
Max. tool dia. * length; 80*250mm; 77.5*200mm; 77.5*150mm
Max. tool weight; 7 kgs; 7 kgs; 7 kgs
Max. Tool diameter- 150 mm; 135 mm; 135 mm
No. of Tools (Arm/Carousel type); 24/16T; 24/16T; 24/16T
Power Source-
Capacity of spindle chiller tank; 5 liters; 5 liters; 5 liters
Capacity of lubrication tank- 3 liters; 2 liters; 2 liters
Capacity of coolant tank; 200 liters; 200 liters; 200 liters
Pneumatic unit/ kg/cm2; 6; 6; 6
Electric power; 20KVA; 15KVA; 15 KVA
Controller; M-64S/Oi-MC; 18i-MB;
M-64S/Oi-MC; 18i-MB;
M-64S/Oi-MC; 18i-MB